Phase composition,microstructure and thermophysical properties of the Srx(Zr0.9Y0.05Yb0.05)O1.95+x ceramics

Sr_x(Zr_0.9Y_0.05Yb_0.05)O_1.95+x (x=1.0, 0.9, 0.8, 0.7) ceramics were prepared by solid state reaction sintering. The sintered Sr_1.0(Zr_0.9Y_0.05Yb_0.05)O_2.95 is a single-phase solid solution while the sintered Sr_x(Zr_0.9Y_0.05Yb_0.05)O_1.95+x (x=0.9?0.7) are composites, and a significant grain growth inhibition is observed in the sintered Sr_x(Zr_0.9Y_0.05Yb_0.05)O_1.95+x (x=1.0, 0.9). Rare-earth elements distribution in the bulk materials indicates that Yb and Y preferentially substitute Zr-sites in SrZrO₃, and the highest solubility of RE₂O₃ in pure SrZrO₃ is ～0.8 mol%. The sintered Sr_x(Zr_0.9Y_0.05Yb_0.05)O_1.95+x have high thermal expansion coefficients up to ～11.0×10^?6 K^-1 (1200°C). Sr_0.8(Zr_0.9Y_0.05Yb_0.05)O_2.75 has the lowest thermal conductivity of 1.38 W·m^-1·K^-1 at 800°C. Sr_x(Zr_0.9Y_0.05Yb_0.05)O_1.95+x (x=1.0, 0.9, 0.8) show no phase transition from 600 to 1400°C, whereas Sr_x(Zr_0.9Y_0.05Yb_0.05)O_1.95+x (x=0.9, 0.8) have excellent high-temperature phase stability over the whole investigated temperature range. Therefore, Sr_x(Zr_0.9Y_0.05Yb_0.05)O_1.95+x (x=1.0, 0.9, 0.8) are considered as promising TBCs materials that might be operated at higher temperatures compared to YSZ.     

Additive Manufacturing of Stable Energy Storage Devices Using a Multinozzle Printing System

The development of the Internet of things has prompted an exponential increase in the demand for flexible, wearable devices, thereby posing new challenges to their integration and conformalization. Additive manufacturing facilitates the fabrication of complex parts via a single integrated process. Herein, the development of a multinozzle, multimaterial printing device is reported. This device accommodates the various characteristics of printing materials, ensures high-capacity printing, and can accommodate a wide range of material viscosities from 0 to 1000 Cp. Complete capacitors, inclusive of the current collector, electrode, and electrolyte, can be printed without repeated clamping to complete the preheating, printing, and sintering processes. This method addresses the poor stability issue associated with printed electrode materials. Furthermore, after the intercalation of LiFePO₄ with Na ions, X-ray photoelectron spectroscopy and X-ray diffraction results reveal that the Na ions permeate the interlayer structure of LiFePO₄, enhancing the ion migration channels by increasing the ion transmission rate. A current rate of 2.5 mAh ensures >2000 charge/discharge cycles, while retaining a charge/discharge efficiency of 96% and a discharge capacity of 91.3 mAh g⁻¹. This manufacturing process can provide conformal power modules for a diverse range of portable devices with various shapes, improving space utilization.     

双目结构光系统仿真建模和误差灵敏度分析

结构光系统目前在三维测量、逆向工程等领域应用日益广泛,然而关于结构光系统性能评测方法的研究成果仍然很少,仅有少数国际标准给出了3D扫描系统的性能评测方法.本文首先建立了双目结构光系统的仿真模型,其中包括了相机镜头畸变模型和针孔成像模型,实现投影仪投射数字正弦条纹的仿真和被扫描的靶球特征量仿真计算,采用的三维重建方法为光学三角法.然后基于仿真模型,对其基线距离相关的误差灵敏度进行了仿真,发现靶球中心位置和靶球球心距对基线距离误差具有较高的灵敏度,可以作为测试方法的输出.最后,如果只考虑基线距离误差,标准测试方法中的校准球棒的位置应在测量范围内的相对距离尽可能大,为标准性能评测方法提供了改进建议.     

P6软件在大型主题公园建设中的应用

目前国内在施项目多应用Microsoft excel、Project或梦龙等管理软件进行计划编制与跟踪管理,某大型文化旅游项目建设中应用P6软件,该软件以计划编制→跟踪→更新→反馈→调整为主线,从时间、资源、费用等多个管理维度,针对大型综合项目呈现出一套综合性管理方案,提高了项目管理水平,取得了良好效果.     

新型绿化用结构土在大型主题公园中的应用

北京某文旅主题公园项目施工中,针对临近道路承载影响植物根系发育和植物根系发育过程中对面层破坏的问题,研究新型环保绿化用结构土技术.使用碎石、粘壤土、土壤改良剂、水等材料的最佳配合比,制成了一种新型绿化用结构土,既满足了硬质路面承载要求,又满足了植物根系地下环境生长需求,还提高了海绵城市效能.     

铝业废阴极炭块资源化利用技术研究

为实现铝业废阴极炭块在钢铁冶金流程中资源化利用，通过深入研究废阴极炭块的相关物性，结合炼钢工艺对炭素及氟化物的物质需求，明确了废阴极炭块的无害化资源利用原理，工业试验结果表明废阴极炭块在炼钢转炉内可较好地实现无害化资源利用。     

一种带有浮体下水防挤拉功能的水上光伏浮体阵列的研制

文章针对水上光伏电站浮体阵列挤拉组件受损的问题,研制出一种新型带有浮体下水防挤拉功能的水上光伏浮体阵列的连接装置,并提出三种方案进行定性定量分析,选取最佳方案为"限位盒"结构,并对最佳方案进行细化,确定基本结构.通过在现有工程中进行技术推广,并跟踪使用效果,结果表明:新装置提高了施工效率,降低了施工成本,效益显著.     

Different hydrothermal corrosion results between two sides of sodalime float glass and the possible corrosion mechanism

Sodalime float (SF) glass is widely used in our societies and industries. Hydrothermal corrosion method is one of the effective ways to prepare a superhydrophobic glass, but there is still lack of knowledge about hydrothermal corrosion behavior and mechanism of SF glass. We have hydrothermally treated SF glass at 180 °C for different time, and tried to reveal the aqueous corrosion process of SF glass. We have characterized the morphologies and chemical compositions of samples, and found that (1) the two sides of SF glass have different corrosion resistances, and (2) a multilayer structural coating with a nanoflake layer (Mg-rich gel layer), a nanowire layer (Ca-rich gel layer), and a porous layer (etched layer) is formed on the air-side of SF glass. Based on the experimental results, we have proposed an aqueous corrosion mechanism of SF glass. The insights of the hydrothermal corrosion behaviors and mechanism provide helpful guidelines to glass surface structural control and functionalization.     

16S rRNA测序技术在饮用水全流程微生物多样性研究的应用

饮用水中微生物与人类健康息息相关.16S rRNA基因序列具有的普遍性及保守性,被越来越多地应用于饮用水水质全流程微生物多样性及群落结构研究.文中简要介绍了16S rRNA基因测序技术的发展历程,并基于16S rRNA基因测序技术在饮用水中的研究成果,探讨了全流程水环境条件与水中微生物多样性的相互关系.结果表明,水源水质、水处理工艺、供水管网条件均导致末梢水中的生物多样性差异,其中,水源水质与末梢水微生物种群结构密切相关,水处理工艺和供水管网特性对末梢水中微生物种群丰度影响较大.研究结果为高品质饮用水生物安全保障提供了新思路.     

电网设备线夹开裂原因

某电力公司变电站用铝合金设备线夹在运行过程发生批次开裂事故,通过宏观观察、断口分析、化学成分分析、力学性能测试、冷冻模拟试验等方法,对设备线夹的开裂原因和开裂机理进行了分析。结果表明:设备线夹焊缝存在焊接缺陷,导致焊缝强度下降;设备线夹接线管底部存在积水空间,寒冷天气下积水结冰,体积膨胀,使焊缝承受设计工况外的负载而过载开裂,造成了线夹开裂。